Washing Instructions for Custom Printed Products

1. Embroidery

• Washing Instructions:
• Machine wash cold or lukewarm (30°C or 85°F).
• Wash inside out to protect the embroidery stitches.
• Avoid using bleach, which can damage both fabric and thread.
• Tumble dry on low heat or air dry to prevent excessive wear on the stitching.
• Iron inside out on a low heat setting to avoid damaging the embroidered area.

2. Colourflex Transfer

• Washing Instructions:
• Machine wash cold (30°C or 85°F) or hand wash.
• Turn garments inside out before washing to protect the print.
• Do not bleach or use fabric softeners, as this can weaken the adhesive.
• Tumble dry on low heat or air dry to maintain the transfer's integrity.
• Iron inside out on low heat only, avoiding direct contact with the print.

3. Direct-to-Film (DTF) Printing

• Washing Instructions:
• Machine wash cold (30°C or 85°F) or hand wash.
• Wash inside out to protect the design from abrasion.
• Avoid bleach and fabric softeners, as these can degrade the film print.
• Tumble dry on low heat or hang dry to preserve print quality.
• Iron inside out on a low heat setting to avoid direct contact with the print.

4. Screen Printing

• Washing Instructions:
• Machine wash inside out in cold water (30°C or 85°F).
• Avoid using bleach, as it can fade the print.
• Tumble dry on low heat or air dry.
• Do not dry clean.
• Iron inside out on a low heat setting, avoiding direct contact with the print.

5. Debossing

• Washing Instructions:
• Debossing is often used on materials like leather, faux leather, and paper, which require special care.
• Clean with a damp cloth to remove dirt and debris.
• Avoid submerging debossed items in water.
• Air dry if the item gets wet, and keep it away from direct sunlight to prevent fading.
• For leather goods, apply leather conditioner to maintain material quality.

6. Digital Label Printing

• Washing Instructions:
• Machine wash cold (30°C or 85°F) or hand wash, with garment inside out.
• Avoid bleach, as it may fade or damage the print.
• Air dry or tumble dry on low heat to protect the label.
• Ironing is not recommended, but if necessary, iron inside out on a low heat setting.

7. Direct Digital (DTG) Printing

• Washing Instructions:
• Machine wash inside out in cold water (30°C or 85°F).
• Do not use bleach or fabric softeners, as they may damage the print.
• Tumble dry on low heat or air dry.
• Iron inside out on a low heat setting, avoiding direct contact with the printed area.

8. Imitation Etch Printing

• Washing Instructions:
• Imitation etching is commonly used for items like glass or plastic, so these items should be cleaned with a soft cloth.
• For glass, avoid harsh chemicals or abrasives that may scratch or dull the finish.
• Hand wash carefully, using warm water and mild detergent.
• Air dry or towel dry to prevent water spots.

9. Laser Engraving

• Washing Instructions:
• Laser engraved items, such as metal, wood, or glass, should be cleaned with a damp cloth or soft sponge.
• Avoid using harsh cleaners or abrasives that could damage the engraved area.
• Do not submerge laser-engraved items in water (for materials like wood or metal).
• Dry items thoroughly with a soft towel or air dry.

10. Pad Printing

• Washing Instructions:
• Hand wash or machine wash cold (30°C or 85°F) for products like pens, mugs, and promotional items.
• Avoid using harsh chemicals, bleach, or fabric softeners on the printed area.
• Tumble dry on low heat or air dry to protect the print.
• Ironing is not necessary or recommended for pad-printed items.

11. Resin Coated Finish

• Washing Instructions:
• For products with a resin-coated finish, clean with a soft cloth and mild soap solution.
• Avoid soaking items in water to prevent damage to the resin coating.
• For fabric items with resin-coated prints, wash with cold water (30°C or 85°F) inside out.
• Air dry or tumble dry on low heat.
• Avoid ironing directly on the resin coating.

12. Rotary Digital Printing

• Washing Instructions:
• Machine wash cold (30°C or 85°F), and wash items inside out to preserve the print.
• Do not bleach, and avoid fabric softeners.
• Tumble dry on low heat or air dry.
• Ironing should be done inside out on a low heat setting to protect the print.

13. Rotary Screen Printing

• Washing Instructions:
• Machine wash inside out in cold water (30°C or 85°F).
• Avoid bleach, which can fade the print.
• Tumble dry on low heat or air dry.
• Iron inside out on a low heat setting to prevent damage to the print.

14. Silicon Digital Print

• Washing Instructions:
• Machine wash cold (30°C or 85°F) or hand wash, with garment inside out.
• Do not bleach or use fabric softeners.
• Tumble dry on low heat or hang dry to preserve print quality.
• Iron inside out on a low heat setting, taking care not to damage the silicon print.

15. Sublimation Printing

• Washing Instructions:
• Machine wash cold (30°C or 85°F) or hand wash inside out to preserve the print.
• Do not use bleach or fabric softeners, as they can affect the print's integrity.
• Tumble dry on low heat or air dry.
• Avoid ironing directly over the printed area. Iron inside out if necessary.

General Care Tips for Custom Prints:

• Wash items as soon as possible after wearing to prevent dirt and oils from breaking down the print.
• Avoid harsh chemicals like bleach, which can damage the print, fabric, or finish.
• Air drying is preferred whenever possible to extend the life of the print.
• For items with heavy prints or embellishments, such as embroidery or laser engraving, avoid washing in high temperatures to maintain their quality.

By following these care instructions, you can ensure that your custom-printed products maintain their vibrant appearance and durability for as long as possible.